Aiidera FHIR-definitioner
0.22.0 - Draft Sweden flag

Aiidera FHIR-definitioner 0.22.0, utkast. Utgiven av Aiidera på fhir.aiidera.se. Varje publicerad utgåva ligger kvar under sin version, som fhir.aiidera.se/0.22.0.

Resource Profile: AiideraOrdination - Detailed Descriptions

Draft as of 2026-11-18

Definitions for the aiidera-ordination resource profile.

Vägledning om hur innehållet i denna tabell ska tolkas finnshär-- no content: do not translate #1 --

0. MedicationRequest
Definition

An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

KortOrdering of medication for patient or group
Kontroll0..*
Är modifierarefalse
Sammanfattningfalse
Alternativa namnPrescription, Order
Invarianterdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

KortA set of rules under which this content was created
Kommentarer

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Kontroll0..1
Typuri
Är modifieraretrue eftersom This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MedicationRequest.extension:effectiveDosePeriod
SkivnamneffectiveDosePeriod
Definition

Period over which the medication should be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

KortPeriod over which the medication should be taken.
Kommentarer

Element MedicationRequest.effectiveDosePeriod has a context of MedicationRequest based on following the parent source element upwards and mapping to MedicationRequest. Element MedicationRequest.effectiveDosePeriod has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Kontroll0..1
Detta element påverkas av följande invarianter: ele-1
TypExtension(R5: Period over which the medication is to be taken (new)) (Extensionstyp: Period)
Är modifierarefalse
Sammanfattningfalse
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. MedicationRequest.extension:renderedDosageInstruction
SkivnamnrenderedDosageInstruction
Definition

R5: MedicationRequest.renderedDosageInstruction (new:markdown)

KortFull representation of the dosage instructions
Kommentarer

Element MedicationRequest.renderedDosageInstruction has a context of MedicationRequest based on following the parent source element upwards and mapping to MedicationRequest. Element MedicationRequest.renderedDosageInstruction has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Kontroll0..1
Detta element påverkas av följande invarianter: ele-1
TypExtension(R5: Full representation of the dosage instructions (new)) (Extensionstyp: markdown)
Är modifierarefalse
Sammanfattningfalse
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. MedicationRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

KortExtensions that cannot be ignored
Kommentarer

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Kontroll0..*
TypExtension
Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Sammanfattningfalse
Krav

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternativa namnextensions, user content
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. MedicationRequest.status
Definition

A code specifying the current state of the order. Generally, this will be active or completed state.

KortCurrent state of the orderactive | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Kommentarer

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Kontroll1..1
BindningKoderna SKA tas från medicationrequest Statushttp://hl7.org/fhir/ValueSet/medicationrequest-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/medicationrequest-status|4.0.1)

A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

Typcode
Är modifieraretrue eftersom This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MedicationRequest.intent
Definition

Whether the request is a proposal, plan, or an original order.

KortOrder, proposal or planproposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Kommentarer

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

Kontroll1..1
BindningKoderna SKA tas från medicationRequest Intenthttp://hl7.org/fhir/ValueSet/medicationrequest-intent|4.0.1
(required to http://hl7.org/fhir/ValueSet/medicationrequest-intent|4.0.1)

The kind of medication order.

Typcode
Är modifieraretrue eftersom This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. MedicationRequest.doNotPerform
Definition

If true indicates that the provider is asking for the medication request not to occur.

KortTrue if request is prohibiting action
Kommentarer

If do not perform is not specified, the request is a positive request e.g. "do perform".

Kontroll0..1
Typboolean
Är modifieraretrue eftersom This element is labeled as a modifier because this element negates the request to occur (ie, this is a request for the medication not to be ordered or prescribed, etc)
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MedicationRequest.medication[x]
Definition

Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

KortMedication to be taken
Kommentarer

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

Kontroll1..1
TypReference(Läkemedlet i en ordination, Medication), CodeableConcept
[x] NoteraSeVal av datatyperför mer information om hur [x] används
Är modifierarefalse
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MedicationRequest.subject
Definition

A link to a resource representing the person or set of individuals to whom the medication will be given.

KortWho or group medication request is for
Kommentarer

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

Kontroll1..1
TypReference(Patient (EU core), Patient, Group)
Är modifierarefalse
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MedicationRequest.requester
Definition

The individual, organization, or device that initiated the request and has responsibility for its activation.

KortThe individual responsible for ordering the medicationWho/What requested the Request
Kontroll0..1
TypReference(Practitioner (EU core), Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
Är modifierarefalse
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Vägledning om hur innehållet i denna tabell ska tolkas finnshär-- no content: do not translate #1 --

0. MedicationRequest
2. MedicationRequest.medication[x]
TypReference(Läkemedlet i en ordination), CodeableConcept
[x] NoteraSeVal av datatyperför mer information om hur [x] används
4. MedicationRequest.subject
TypReference(Patient (EU core))
6. MedicationRequest.requester
TypReference(Practitioner (EU core))

Vägledning om hur innehållet i denna tabell ska tolkas finnshär-- no content: do not translate #1 --

0. MedicationRequest
Definition

An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

KortOrdering of medication for patient or group
Kontroll0..*
Är modifierarefalse
Sammanfattningfalse
Alternativa namnPrescription, Order
Invarianterdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationRequest.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

KortLogical id of this artifact
Kommentarer

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Kontroll0..1
Typid
Är modifierarefalse
Sammanfattningtrue
4. MedicationRequest.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

KortMetadata about the resource
Kontroll0..1
TypMeta
Är modifierarefalse
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MedicationRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

KortA set of rules under which this content was created
Kommentarer

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Kontroll0..1
Typuri
Är modifieraretrue eftersom This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningtrue
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MedicationRequest.language
Definition

The base language in which the resource is written.

KortLanguage of the request
Kommentarer

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Kontroll0..1
BindningKoderna BÖR tas från CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Ytterligare bindningarSyfte
AllLanguagesMaxbindning
Typcode
Är modifierarefalse
Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
Sammanfattningfalse
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MedicationRequest.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

KortText summary of the resource, for human interpretation
Kommentarer

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Kontroll0..1
TypNarrative
Är modifierarefalse
Sammanfattningfalse
Alternativa namnnarrative, html, xhtml, display
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MedicationRequest.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

KortContained, inline Resources
Kommentarer

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Kontroll0..*
TypResource
Är modifierarefalse
Sammanfattningfalse
Alternativa namninline resources, anonymous resources, contained resources
14. MedicationRequest.extension
Definition

An Extension

KortExtension
Kontroll0..*
TypExtension
Är modifierarefalse
Sammanfattningfalse
Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
  • value @ url
  • 16. MedicationRequest.extension:effectiveDosePeriod
    SkivnamneffectiveDosePeriod
    Definition

    Period over which the medication should be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

    KortPeriod over which the medication should be taken.
    Kommentarer

    Element MedicationRequest.effectiveDosePeriod has a context of MedicationRequest based on following the parent source element upwards and mapping to MedicationRequest. Element MedicationRequest.effectiveDosePeriod has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

    Kontroll0..1
    Detta element påverkas av följande invarianter: ele-1
    TypExtension(R5: Period over which the medication is to be taken (new)) (Extensionstyp: Period)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. MedicationRequest.extension:renderedDosageInstruction
    SkivnamnrenderedDosageInstruction
    Definition

    R5: MedicationRequest.renderedDosageInstruction (new:markdown)

    KortFull representation of the dosage instructions
    Kommentarer

    Element MedicationRequest.renderedDosageInstruction has a context of MedicationRequest based on following the parent source element upwards and mapping to MedicationRequest. Element MedicationRequest.renderedDosageInstruction has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

    Kontroll0..1
    Detta element påverkas av följande invarianter: ele-1
    TypExtension(R5: Full representation of the dosage instructions (new)) (Extensionstyp: markdown)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. MedicationRequest.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    KortExtensions that cannot be ignored
    Kommentarer

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Kontroll0..*
    TypExtension
    Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Sammanfattningfalse
    Krav

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternativa namnextensions, user content
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. MedicationRequest.identifier
    Definition

    Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

    KortBusiness identifier for this request
    Kommentarer

    This is a business identifier, not a resource identifier.

    NoteraDetta är en verksamhetsidentifierare, inte en resursidentifierare (se diskussion)
    Kontroll0..*
    TypIdentifier
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. MedicationRequest.status
    Definition

    A code specifying the current state of the order. Generally, this will be active or completed state.

    KortCurrent state of the order
    Kommentarer

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Kontroll1..1
    BindningKoderna SKA tas från medicationrequest Status
    (required to http://hl7.org/fhir/ValueSet/medicationrequest-status|4.0.1)

    A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.

    Typcode
    Är modifieraretrue eftersom This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. MedicationRequest.statusReason
    Definition

    Captures the reason for the current state of the MedicationRequest.

    KortReason for current status of the order
    Kommentarer

    This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

    Kontroll0..1
    BindningFör exempelkoder, se medicationRequest Status Reason Codes
    (example to http://hl7.org/fhir/ValueSet/medicationrequest-status-reason|4.0.1)

    Identifies the reasons for a given status.

    TypCodeableConcept
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. MedicationRequest.intent
    Definition

    Whether the request is a proposal, plan, or an original order.

    KortOrder, proposal or plan
    Kommentarer

    It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

    An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

    This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

    Kontroll1..1
    BindningKoderna SKA tas från medicationRequest Intent
    (required to http://hl7.org/fhir/ValueSet/medicationrequest-intent|4.0.1)

    The kind of medication order.

    Typcode
    Är modifieraretrue eftersom This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. MedicationRequest.category
    Definition

    Indicates the type of medication request (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).

    KortCategory of the medication request
    Kommentarer

    The category can be used to include where the medication is expected to be consumed or other types of requests.

    Kontroll0..*
    BindningFör exempelkoder, se medicationRequest Category Codes
    (example to http://hl7.org/fhir/ValueSet/medicationrequest-category|4.0.1)

    A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.

    TypCodeableConcept
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. MedicationRequest.priority
    Definition

    Indicates how quickly the Medication Request should be addressed with respect to other requests.

    Kortroutine | urgent | asap | stat
    Kontroll0..1
    BindningKoderna SKA tas från RequestPriority
    (required to http://hl7.org/fhir/ValueSet/request-priority|4.0.1)

    Identifies the level of importance to be assigned to actioning the request.

    Typcode
    Är modifierarefalse
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. MedicationRequest.doNotPerform
    Definition

    If true indicates that the provider is asking for the medication request not to occur.

    KortTrue if request is prohibiting action
    Kommentarer

    If do not perform is not specified, the request is a positive request e.g. "do perform".

    Kontroll0..1
    Typboolean
    Är modifieraretrue eftersom This element is labeled as a modifier because this element negates the request to occur (ie, this is a request for the medication not to be ordered or prescribed, etc)
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. MedicationRequest.reported[x]
    Definition

    Indicates if this record was captured as a secondary 'reported' record rather than as an original primary source-of-truth record. It may also indicate the source of the report.

    KortReported rather than primary record
    Kontroll0..1
    TypVal av: boolean, Reference(Patient, Practitioner, PractitionerRole, RelatedPerson, Organization)
    [x] NoteraSeVal av datatyperför mer information om hur [x] används
    Är modifierarefalse
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. MedicationRequest.medication[x]
    Definition

    Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

    KortMedication to be taken
    Kommentarer

    If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

    Kontroll1..1
    TypReference(Läkemedlet i en ordination)
    [x] NoteraSeVal av datatyperför mer information om hur [x] används
    Är modifierarefalse
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. MedicationRequest.subject
    Definition

    A link to a resource representing the person or set of individuals to whom the medication will be given.

    KortWho or group medication request is for
    Kommentarer

    The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

    Kontroll1..1
    TypReference(Patient (EU core))
    Är modifierarefalse
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. MedicationRequest.encounter
    Definition

    The Encounter during which this [x] was created or to which the creation of this record is tightly associated.

    KortEncounter created as part of encounter/admission/stay
    Kommentarer

    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

    Kontroll0..1
    TypReference(Encounter)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. MedicationRequest.supportingInformation
    Definition

    Include additional information (for example, patient height and weight) that supports the ordering of the medication.

    KortInformation to support ordering of the medication
    Kontroll0..*
    TypReference(Resource)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. MedicationRequest.authoredOn
    Definition

    The date (and perhaps time) when the prescription was initially written or authored on.

    KortDate when the request was authored
    Kontroll0..1
    TypdateTime
    Är modifierarefalse
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. MedicationRequest.requester
    Definition

    The individual, organization, or device that initiated the request and has responsibility for its activation.

    KortThe individual responsible for ordering the medication
    Kontroll0..1
    TypReference(Practitioner (EU core))
    Är modifierarefalse
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. MedicationRequest.performer
    Definition

    The specified desired performer of the medication treatment (e.g. the performer of the medication administration).

    KortIntended performer of administration
    Kontroll0..1
    TypReference(Practitioner, PractitionerRole, Organization, Patient, Device, RelatedPerson, CareTeam)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. MedicationRequest.performerType
    Definition

    Indicates the type of performer of the administration of the medication.

    KortDesired kind of performer of the medication administration
    Kommentarer

    If specified without indicating a performer, this indicates that the performer must be of the specified type. If specified with a performer then it indicates the requirements of the performer if the designated performer is not available.

    Kontroll0..1
    BindningFör exempelkoder, se ProcedurePerformerRoleCodes
    (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

    Identifies the type of individual that is desired to administer the medication.

    TypCodeableConcept
    Är modifierarefalse
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. MedicationRequest.recorder
    Definition

    The person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order.

    KortPerson who entered the request
    Kontroll0..1
    TypReference(Practitioner, PractitionerRole)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. MedicationRequest.reasonCode
    Definition

    The reason or the indication for ordering or not ordering the medication.

    KortReason or indication for this prescription
    Kommentarer

    This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

    Kontroll0..*
    BindningFör exempelkoder, se Condition/Problem/DiagnosisCodes
    (example to http://hl7.org/fhir/ValueSet/condition-code)

    A coded concept indicating why the medication was ordered.

    TypCodeableConcept
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. MedicationRequest.reasonReference
    Definition

    Condition or observation that supports why the medication was ordered.

    KortCondition or observation that supports this prescription
    Kommentarer

    This is a reference to a condition or observation that is the reason for the medication order. If only a code exists, use reasonCode.

    Kontroll0..*
    TypReference(Condition, Observation)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. MedicationRequest.instantiatesCanonical
    Definition

    The URL pointing to a protocol, guideline, orderset, or other definition that is adhered to in whole or in part by this MedicationRequest.

    KortInstantiates FHIR protocol or definition
    Kontroll0..*
    Typcanonical
    Är modifierarefalse
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. MedicationRequest.instantiatesUri
    Definition

    The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this MedicationRequest.

    KortInstantiates external protocol or definition
    Kontroll0..*
    Typuri
    Är modifierarefalse
    Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. MedicationRequest.basedOn
    Definition

    A plan or request that is fulfilled in whole or in part by this medication request.

    KortWhat request fulfills
    Kontroll0..*
    TypReference(CarePlan, MedicationRequest, ServiceRequest, ImmunizationRecommendation)
    Är modifierarefalse
    Sammanfattningtrue
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. MedicationRequest.groupIdentifier
    Definition

    A shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition or prescription.

    KortGroup identifier
    Kontroll0..1
    TypIdentifier
    Är modifierarefalse
    Sammanfattningtrue
    Krav

    Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. MedicationRequest.courseOfTherapyType
    Definition

    The description of the overall patte3rn of the administration of the medication to the patient.

    KortOverall pattern of medication administration
    Kommentarer

    This attribute should not be confused with the protocol of the medication.

    Kontroll0..1
    BindningFör exempelkoder, se medicationRequest Course of Therapy Codes
    (example to http://hl7.org/fhir/ValueSet/medicationrequest-course-of-therapy|4.0.1)

    Identifies the overall pattern of medication administratio.

    TypCodeableConcept
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. MedicationRequest.insurance
    Definition

    Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.

    KortAssociated insurance coverage
    Kontroll0..*
    TypReference(Coverage, ClaimResponse)
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. MedicationRequest.note
    Definition

    Extra information about the prescription that could not be conveyed by the other attributes.

    KortInformation about the prescription
    Kontroll0..*
    TypAnnotation
    Är modifierarefalse
    Sammanfattningfalse
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. MedicationRequest.note.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    KortUnique id for inter-element referencing
    Kontroll0..1
    Typstring
    Är modifierarefalse
    XML-formatI XML-formatet representeras denna egenskap som ett attribut.
    Sammanfattningfalse
    76. MedicationRequest.note.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    KortAdditional content defined by implementations
    Kommentarer

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Kontroll0..*
    TypExtension
    Är modifierarefalse
    Sammanfattningfalse
    Alternativa namnextensions, user content
    Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.note.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
    • value @ url
    • 78. MedicationRequest.note.author[x]
      Definition

      The individual responsible for making the annotation.

      KortIndividual responsible for the annotation
      Kommentarer

      Organization is used when there's no need for specific attribution as to who made the comment.

      Kontroll0..1
      TypVal av: Reference(Practitioner, Patient, RelatedPerson, Organization), string
      [x] NoteraSeVal av datatyperför mer information om hur [x] används
      Är modifierarefalse
      Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
      Sammanfattningtrue
      Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      80. MedicationRequest.note.time
      Definition

      Indicates when this particular annotation was made.

      KortWhen the annotation was made
      Kontroll0..1
      TypdateTime
      Är modifierarefalse
      Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
      Sammanfattningtrue
      Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. MedicationRequest.note.text
      Definition

      The text of the annotation in markdown format.

      KortTextual note about the request
      Kontroll1..1
      Typmarkdown
      Är modifierarefalse
      Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
      Sammanfattningtrue
      Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. MedicationRequest.dosageInstruction
      Definition

      Indicates how the medication is to be used by the patient.

      KortHow the medication should be taken.
      Kommentarer

      There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed.

      Kontroll0..*
      TypDosage
      Är modifierarefalse
      Sammanfattningfalse
      Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. MedicationRequest.dosageInstruction.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      KortUnique id for inter-element referencing
      Kontroll0..1
      Typstring
      Är modifierarefalse
      XML-formatI XML-formatet representeras denna egenskap som ett attribut.
      Sammanfattningfalse
      88. MedicationRequest.dosageInstruction.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      KortAdditional content defined by implementations
      Kommentarer

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Kontroll0..*
      TypExtension
      Är modifierarefalse
      Sammanfattningfalse
      Alternativa namnextensions, user content
      Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dosageInstruction.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
      • value @ url
      • 90. MedicationRequest.dosageInstruction.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        KortExtensions that cannot be ignored even if unrecognized
        Kommentarer

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Kontroll0..*
        TypExtension
        Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Sammanfattningtrue
        Krav

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternativa namnextensions, user content, modifiers
        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        92. MedicationRequest.dosageInstruction.sequence
        Definition

        Indicates the order in which the dosage instructions should be applied or interpreted.

        KortThe order of the dosage instructions
        Kontroll0..1
        Typinteger
        Är modifierarefalse
        Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
        Sammanfattningtrue
        Krav

        If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential.

        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. MedicationRequest.dosageInstruction.text
        Definition

        Free text dosage instructions e.g. SIG.

        KortFree text dosage instructions
        Kontroll0..1
        Typstring
        Är modifierarefalse
        Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
        Sammanfattningtrue
        Krav

        Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text.

        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. MedicationRequest.dosageInstruction.additionalInstruction
        Definition

        Supplemental instructions to the patient on how to take the medication (e.g. "with meals" or"take half to one hour before food") or warnings for the patient about the medication (e.g. "may cause drowsiness" or "avoid exposure of skin to direct sunlight or sunlamps").

        KortSupplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
        Kommentarer

        Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or "immediately following drug x") should be populated in dosage.text.

        Kontroll0..*
        BindningFör exempelkoder, se SNOMEDCTAdditionalDosageInstructions
        (example to http://hl7.org/fhir/ValueSet/additional-instruction-codes|4.0.1)

        A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".

        TypCodeableConcept
        Är modifierarefalse
        Sammanfattningtrue
        Krav

        Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded.

        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        98. MedicationRequest.dosageInstruction.patientInstruction
        Definition

        Instructions in terms that are understood by the patient or consumer.

        KortPatient or consumer oriented instructions
        Kontroll0..1
        Typstring
        Är modifierarefalse
        Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
        Sammanfattningtrue
        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. MedicationRequest.dosageInstruction.timing
        Definition

        When medication should be administered.

        KortAdministration schedule
        Kommentarer

        This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

        Kontroll0..1
        TypTiming
        Är modifierarefalse
        Sammanfattningtrue
        Krav

        The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        102. MedicationRequest.dosageInstruction.timing.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        KortUnique id for inter-element referencing
        Kontroll0..1
        Typstring
        Är modifierarefalse
        XML-formatI XML-formatet representeras denna egenskap som ett attribut.
        Sammanfattningfalse
        104. MedicationRequest.dosageInstruction.timing.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        KortAdditional content defined by implementations
        Kommentarer

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Kontroll0..*
        TypExtension
        Är modifierarefalse
        Sammanfattningfalse
        Alternativa namnextensions, user content
        Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dosageInstruction.timing.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
        • value @ url
        • 106. MedicationRequest.dosageInstruction.timing.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          KortExtensions that cannot be ignored even if unrecognized
          Kommentarer

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Kontroll0..*
          TypExtension
          Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Sammanfattningtrue
          Krav

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternativa namnextensions, user content, modifiers
          Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          108. MedicationRequest.dosageInstruction.timing.event
          Definition

          Identifies specific times when the event occurs.

          KortWhen the event occurs
          Kontroll0..*
          TypdateTime
          Är modifierarefalse
          Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
          Sammanfattningtrue
          Krav

          In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.

          Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. MedicationRequest.dosageInstruction.timing.repeat
          Definition

          A set of rules that describe when the event is scheduled.

          KortWhen the event is to occur
          Kontroll0..1
          TypElement
          Är modifierarefalse
          Sammanfattningtrue
          Krav

          Many timing schedules are determined by regular repetitions.

          Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          tim-1: if there's a duration, there needs to be duration units (duration.empty() or durationUnit.exists())
          tim-2: if there's a period, there needs to be period units (period.empty() or periodUnit.exists())
          tim-4: duration SHALL be a non-negative value (duration.exists() implies duration >= 0)
          tim-5: period SHALL be a non-negative value (period.exists() implies period >= 0)
          tim-6: If there's a periodMax, there must be a period (periodMax.empty() or period.exists())
          tim-7: If there's a durationMax, there must be a duration (durationMax.empty() or duration.exists())
          tim-8: If there's a countMax, there must be a count (countMax.empty() or count.exists())
          tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) (offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not())))
          tim-10: If there's a timeOfDay, there cannot be a when, or vice versa (timeOfDay.empty() or when.empty())
          112. MedicationRequest.dosageInstruction.timing.repeat.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          KortUnique id for inter-element referencing
          Kontroll0..1
          Typstring
          Är modifierarefalse
          XML-formatI XML-formatet representeras denna egenskap som ett attribut.
          Sammanfattningfalse
          114. MedicationRequest.dosageInstruction.timing.repeat.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          KortAdditional content defined by implementations
          Kommentarer

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Kontroll0..*
          TypExtension
          Är modifierarefalse
          Sammanfattningfalse
          Alternativa namnextensions, user content
          Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dosageInstruction.timing.repeat.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
          • value @ url
          • 116. MedicationRequest.dosageInstruction.timing.repeat.bounds[x]
            Definition

            Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule.

            KortLength/Range of lengths, or (Start and/or end) limits
            Kontroll0..1
            TypVal av: Duration, Range, Period
            [x] NoteraSeVal av datatyperför mer information om hur [x] används
            Är modifierarefalse
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. MedicationRequest.dosageInstruction.timing.repeat.count
            Definition

            A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values.

            KortNumber of times to repeat
            Kommentarer

            If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.

            Kontroll0..1
            TyppositiveInt
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Krav

            Repetitions may be limited by end time or total occurrences.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            120. MedicationRequest.dosageInstruction.timing.repeat.countMax
            Definition

            If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times.

            KortMaximum number of times to repeat
            Kontroll0..1
            TyppositiveInt
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. MedicationRequest.dosageInstruction.timing.repeat.duration
            Definition

            How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration.

            KortDuration of the treatment
            Kommentarer

            For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

            Kontroll0..1
            Typdecimal
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Krav

            Some activities are not instantaneous and need to be maintained for a period of time.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            124. MedicationRequest.dosageInstruction.timing.repeat.durationMax
            Definition

            If present, indicates that the duration is a range - so to perform the action between [duration] and [durationMax] time length.

            KortHow long when it happens (Max)
            Kommentarer

            For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

            Kontroll0..1
            Typdecimal
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Krav

            Some activities are not instantaneous and need to be maintained for a period of time.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            126. MedicationRequest.dosageInstruction.timing.repeat.durationUnit
            Definition

            The units of time for the duration, in UCUM units.

            Korts | min | h | d | wk | mo | a - unit of time (UCUM)
            Kontroll0..1
            BindningKoderna SKA tas från UnitsOfTime
            (required to http://hl7.org/fhir/ValueSet/units-of-time|4.0.1)

            A unit of time (units from UCUM).

            Typcode
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            128. MedicationRequest.dosageInstruction.timing.repeat.frequency
            Definition

            The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency.

            KortFrequency times per period
            Kontroll0..1
            TyppositiveInt
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Betydelse om saknasIf no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            130. MedicationRequest.dosageInstruction.timing.repeat.frequencyMax
            Definition

            If present, indicates that the frequency is a range - so to repeat between [frequency] and [frequencyMax] times within the period or period range.

            KortEvent occurs up to frequencyMax times per period
            Kontroll0..1
            TyppositiveInt
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            132. MedicationRequest.dosageInstruction.timing.repeat.period
            Definition

            Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length.

            KortDuration of time over which repetitions are to occur
            Kontroll0..1
            Typdecimal
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            134. MedicationRequest.dosageInstruction.timing.repeat.periodMax
            Definition

            If present, indicates that the period is a range from [period] to [periodMax], allowing expressing concepts such as "do this once every 3-5 days.

            KortUpper limit of period (3-4 hours)
            Kontroll0..1
            Typdecimal
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            136. MedicationRequest.dosageInstruction.timing.repeat.periodUnit
            Definition

            The units of time for the period in UCUM units.

            KortUnit of the period (e.g. day)
            Kontroll0..1
            BindningKoderna SKA tas från UnitsOfTime
            (required to http://hl7.org/fhir/ValueSet/units-of-time|4.0.1)

            A unit of time (units from UCUM).

            Typcode
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            138. MedicationRequest.dosageInstruction.timing.repeat.dayOfWeek
            Definition

            If one or more days of week is provided, then the action happens only on the specified day(s).

            Kortmon | tue | wed | thu | fri | sat | sun
            Kommentarer

            If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek.

            Kontroll0..*
            BindningKoderna SKA tas från DaysOfWeek
            (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)
            Typcode
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            140. MedicationRequest.dosageInstruction.timing.repeat.timeOfDay
            Definition

            Specified time of day for action to take place.

            KortTime of day for action
            Kommentarer

            When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay.

            Kontroll0..*
            Typtime
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            142. MedicationRequest.dosageInstruction.timing.repeat.when
            Definition

            An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur.

            KortCode for time period of occurrence
            Kommentarer

            When more than one event is listed, the event is tied to the union of the specified events.

            Kontroll0..*
            BindningKoderna SKA tas från EventTiming
            (required to http://hl7.org/fhir/ValueSet/event-timing|4.0.1)

            Real world event relating to the schedule.

            Typcode
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Krav

            Timings are frequently determined by occurrences such as waking, eating and sleep.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            144. MedicationRequest.dosageInstruction.timing.repeat.offset
            Definition

            The number of minutes from the event. If the event code does not indicate whether the minutes is before or after the event, then the offset is assumed to be after the event.

            KortMinutes from event (before or after)
            Kontroll0..1
            TypunsignedInt
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            146. MedicationRequest.dosageInstruction.timing.code
            Definition

            A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).

            KortA code for the timing schedule.
            Kommentarer

            BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).

            Kontroll0..1
            BindningKoderna BÖR tas från TimingAbbreviation
            (preferred to http://hl7.org/fhir/ValueSet/timing-abbreviation|4.0.1)

            Code for a known / defined timing pattern.

            TypCodeableConcept
            Är modifierarefalse
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            148. MedicationRequest.dosageInstruction.asNeeded[x]
            Definition

            Indicates whether the Medication is only taken when needed within a specific dosing schedule (Boolean option), or it indicates the precondition for taking the Medication (CodeableConcept).

            KortTake "as needed" (for x)
            Kommentarer

            Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed".

            Kontroll0..1
            BindningFör exempelkoder, se SNOMEDCTMedicationAsNeededReasonCodes
            (example to http://hl7.org/fhir/ValueSet/medication-as-needed-reason|4.0.1)

            A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.

            TypVal av: boolean, CodeableConcept
            [x] NoteraSeVal av datatyperför mer information om hur [x] används
            Är modifierarefalse
            Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            150. MedicationRequest.dosageInstruction.site
            Definition

            Body site to administer to.

            KortBody site to administer to
            Kommentarer

            If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

            Kontroll0..1
            BindningFör exempelkoder, se SNOMEDCTAnatomicalStructureForAdministrationSiteCodes
            (example to http://hl7.org/fhir/ValueSet/approach-site-codes|4.0.1)

            A coded concept describing the site location the medicine enters into or onto the body.

            TypCodeableConcept
            Är modifierarefalse
            Sammanfattningtrue
            Krav

            A coded specification of the anatomic site where the medication first enters the body.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            152. MedicationRequest.dosageInstruction.route
            Definition

            How drug should enter body.

            KortRoute of administration
            Kontroll0..1
            BindningFör exempelkoder, se SNOMEDCTRouteCodes
            (example to http://hl7.org/fhir/ValueSet/route-codes|4.0.1)

            A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.

            TypCodeableConcept
            Är modifierarefalse
            Sammanfattningtrue
            Krav

            A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            154. MedicationRequest.dosageInstruction.method
            Definition

            Technique for administering medication.

            KortTechnique for administering medication
            Kommentarer

            Terminologies used often pre-coordinate this term with the route and or form of administration.

            Kontroll0..1
            BindningFör exempelkoder, se SNOMEDCTAdministrationMethodCodes
            (example to http://hl7.org/fhir/ValueSet/administration-method-codes|4.0.1)

            A coded concept describing the technique by which the medicine is administered.

            TypCodeableConcept
            Är modifierarefalse
            Sammanfattningtrue
            Krav

            A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV.

            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            156. MedicationRequest.dosageInstruction.doseAndRate
            Definition

            The amount of medication administered.

            KortAmount of medication administered
            Kontroll0..*
            TypElement
            Är modifierarefalse
            Sammanfattningtrue
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            158. MedicationRequest.dosageInstruction.doseAndRate.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            KortUnique id for inter-element referencing
            Kontroll0..1
            Typstring
            Är modifierarefalse
            XML-formatI XML-formatet representeras denna egenskap som ett attribut.
            Sammanfattningfalse
            160. MedicationRequest.dosageInstruction.doseAndRate.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            KortAdditional content defined by implementations
            Kommentarer

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Kontroll0..*
            TypExtension
            Är modifierarefalse
            Sammanfattningfalse
            Alternativa namnextensions, user content
            Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dosageInstruction.doseAndRate.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
            • value @ url
            • 162. MedicationRequest.dosageInstruction.doseAndRate.type
              Definition

              The kind of dose or rate specified, for example, ordered or calculated.

              KortThe kind of dose or rate specified
              Kontroll0..1
              BindningFör exempelkoder, se DoseAndRateType
              (example to http://hl7.org/fhir/ValueSet/dose-rate-type|4.0.1)

              The kind of dose or rate specified.

              TypCodeableConcept
              Är modifierarefalse
              Sammanfattningtrue
              Krav

              If the type is not populated, assume to be "ordered".

              Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              164. MedicationRequest.dosageInstruction.doseAndRate.dose[x]
              Definition

              Amount of medication per dose.

              KortAmount of medication per dose
              Kommentarer

              Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

              Kontroll0..1
              TypVal av: Range, Quantity(SimpleQuantity)
              [x] NoteraSeVal av datatyperför mer information om hur [x] används
              Är modifierarefalse
              Sammanfattningtrue
              Krav

              The amount of therapeutic or other substance given at one administration event.

              Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dosageInstruction.doseAndRate.dose[x]. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
              • type @ $this
              • 166. MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity
                SkivnamndoseQuantity
                Definition

                Amount of medication per dose.

                KortAmount of medication per dose
                Kommentarer

                Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

                Kontroll0..1
                TypQuantity(SimpleQuantity)
                [x] NoteraSeVal av datatyperför mer information om hur [x] används
                Är modifierarefalse
                Sammanfattningtrue
                Krav

                The amount of therapeutic or other substance given at one administration event.

                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                168. MedicationRequest.dosageInstruction.doseAndRate.rate[x]
                Definition

                Amount of medication per unit of time.

                KortAmount of medication per unit of time
                Kommentarer

                It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

                It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.

                Kontroll0..1
                TypVal av: Ratio, Range, Quantity(SimpleQuantity)
                [x] NoteraSeVal av datatyperför mer information om hur [x] används
                Är modifierarefalse
                Sammanfattningtrue
                Krav

                Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                170. MedicationRequest.dosageInstruction.maxDosePerPeriod
                Definition

                Upper limit on medication per unit of time.

                KortUpper limit on medication per unit of time
                Kommentarer

                This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day".

                Kontroll0..1
                TypRatio
                Är modifierarefalse
                Sammanfattningtrue
                Krav

                The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                172. MedicationRequest.dosageInstruction.maxDosePerAdministration
                Definition

                Upper limit on medication per administration.

                KortUpper limit on medication per administration
                Kommentarer

                This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.

                Kontroll0..1
                TypQuantity(SimpleQuantity)
                Är modifierarefalse
                Sammanfattningtrue
                Krav

                The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                174. MedicationRequest.dosageInstruction.maxDosePerLifetime
                Definition

                Upper limit on medication per lifetime of the patient.

                KortUpper limit on medication per lifetime of the patient
                Kontroll0..1
                TypQuantity(SimpleQuantity)
                Är modifierarefalse
                Sammanfattningtrue
                Krav

                The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                176. MedicationRequest.dispenseRequest
                Definition

                Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

                KortMedication supply authorization
                Kontroll0..1
                TypBackboneElement
                Är modifierarefalse
                Sammanfattningfalse
                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                178. MedicationRequest.dispenseRequest.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                KortUnique id for inter-element referencing
                Kontroll0..1
                Typstring
                Är modifierarefalse
                XML-formatI XML-formatet representeras denna egenskap som ett attribut.
                Sammanfattningfalse
                180. MedicationRequest.dispenseRequest.extension
                Definition

                An Extension

                KortExtension
                Kontroll0..*
                TypExtension
                Är modifierarefalse
                Sammanfattningfalse
                Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingDetta element introducerar en uppsättning skivor på MedicationRequest.dispenseRequest.extension. Skivorna ärOordnad och Open, och kan särskiljas med hjälp av följande diskriminatorer:
                • value @ url
                • 182. MedicationRequest.dispenseRequest.extension:prescribedQuantity
                  SkivnamnprescribedQuantity
                  Definition

                  When Medication resource implies a pack size, prescribedQuantity should convey number of packages. When the Medication does not imply an amount, overall amount could be in tablets or millilitres.

                  KortOverall amount of product prescribed, independent from the number of repeats.
                  Kontroll0..1
                  Detta element påverkas av följande invarianter: ele-1
                  TypExtension(MedicationRequest - Prescribed Quantity) (Extensionstyp: Quantity)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  184. MedicationRequest.dispenseRequest.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  KortExtensions that cannot be ignored even if unrecognized
                  Kommentarer

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Kontroll0..*
                  TypExtension
                  Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Sammanfattningtrue
                  Krav

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternativa namnextensions, user content, modifiers
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  186. MedicationRequest.dispenseRequest.initialFill
                  Definition

                  Indicates the quantity or duration for the first dispense of the medication.

                  KortFirst fill details
                  Kommentarer

                  If populating this element, either the quantity or the duration must be included.

                  Kontroll0..1
                  TypBackboneElement
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  188. MedicationRequest.dispenseRequest.initialFill.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  KortUnique id for inter-element referencing
                  Kontroll0..1
                  Typstring
                  Är modifierarefalse
                  XML-formatI XML-formatet representeras denna egenskap som ett attribut.
                  Sammanfattningfalse
                  190. MedicationRequest.dispenseRequest.initialFill.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  KortAdditional content defined by implementations
                  Kommentarer

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Kontroll0..*
                  TypExtension
                  Är modifierarefalse
                  Sammanfattningfalse
                  Alternativa namnextensions, user content
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  192. MedicationRequest.dispenseRequest.initialFill.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  KortExtensions that cannot be ignored even if unrecognized
                  Kommentarer

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Kontroll0..*
                  TypExtension
                  Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Sammanfattningtrue
                  Krav

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternativa namnextensions, user content, modifiers
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  194. MedicationRequest.dispenseRequest.initialFill.quantity
                  Definition

                  The amount or quantity to provide as part of the first dispense.

                  KortFirst fill quantity
                  Kontroll0..1
                  TypQuantity(SimpleQuantity)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  196. MedicationRequest.dispenseRequest.initialFill.duration
                  Definition

                  The length of time that the first dispense is expected to last.

                  KortFirst fill duration
                  Kontroll0..1
                  TypDuration
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  198. MedicationRequest.dispenseRequest.dispenseInterval
                  Definition

                  The minimum period of time that must occur between dispenses of the medication.

                  KortInterval between dispenses
                  Kontroll0..1
                  TypDuration
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  200. MedicationRequest.dispenseRequest.validityPeriod
                  Definition

                  This indicates the validity period of a prescription (stale dating the Prescription).

                  KortValidity period of the dispense request
                  Kommentarer

                  It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

                  Kontroll0..1
                  TypPeriod
                  Är modifierarefalse
                  Sammanfattningfalse
                  Krav

                  Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  202. MedicationRequest.dispenseRequest.numberOfRepeatsAllowed
                  Definition

                  An integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does not include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets. A prescriber may explicitly say that zero refills are permitted after the initial dispense.

                  KortNumber of repeats allowed
                  Kommentarer

                  If displaying "number of authorized fills", add 1 to this number.

                  Kontroll0..1
                  TypunsignedInt
                  Är modifierarefalse
                  Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  204. MedicationRequest.dispenseRequest.quantity
                  Definition

                  The amount that is to be dispensed for one fill.

                  KortAmount of medication to supply per dispense
                  Kontroll0..1
                  TypQuantity(SimpleQuantity)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  206. MedicationRequest.dispenseRequest.expectedSupplyDuration
                  Definition

                  Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last.

                  KortNumber of days supply per dispense
                  Kommentarer

                  In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage). When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors.

                  Kontroll0..1
                  TypDuration
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  208. MedicationRequest.dispenseRequest.performer
                  Definition

                  Indicates the intended dispensing Organization specified by the prescriber.

                  KortIntended dispenser
                  Kontroll0..1
                  TypReference(Organization)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  210. MedicationRequest.substitution
                  Definition

                  Indicates whether or not substitution can or should be part of the dispense. In some cases, substitution must happen, in other cases substitution must not happen. This block explains the prescriber's intent. If nothing is specified substitution may be done.

                  KortWhether substitution is allowed
                  Kontroll0..1
                  TypBackboneElement
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  212. MedicationRequest.substitution.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  KortUnique id for inter-element referencing
                  Kontroll0..1
                  Typstring
                  Är modifierarefalse
                  XML-formatI XML-formatet representeras denna egenskap som ett attribut.
                  Sammanfattningfalse
                  214. MedicationRequest.substitution.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  KortAdditional content defined by implementations
                  Kommentarer

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Kontroll0..*
                  TypExtension
                  Är modifierarefalse
                  Sammanfattningfalse
                  Alternativa namnextensions, user content
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  216. MedicationRequest.substitution.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  KortExtensions that cannot be ignored even if unrecognized
                  Kommentarer

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Kontroll0..*
                  TypExtension
                  Är modifieraretrue eftersom Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Sammanfattningtrue
                  Krav

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternativa namnextensions, user content, modifiers
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  218. MedicationRequest.substitution.allowed[x]
                  Definition

                  True if the prescriber allows a different drug to be dispensed from what was prescribed.

                  KortWhether substitution is allowed or not
                  Kommentarer

                  This element is labeled as a modifier because whether substitution is allow or not, it cannot be ignored.

                  Kontroll1..1
                  BindningFör exempelkoder, se ActSubstanceAdminSubstitutionCode
                  (example to http://terminology.hl7.org/ValueSet/v3-ActSubstanceAdminSubstitutionCode)

                  Identifies the type of substitution allowed.

                  TypVal av: boolean, CodeableConcept
                  [x] NoteraSeVal av datatyperför mer information om hur [x] används
                  Är modifierarefalse
                  Primitivt värdeDetta primitiva element kan vara närvarande, frånvarande eller ersättas av en extension
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  220. MedicationRequest.substitution.reason
                  Definition

                  Indicates the reason for the substitution, or why substitution must or must not be performed.

                  KortWhy should (not) substitution be made
                  Kontroll0..1
                  BindningFör exempelkoder, se SubstanceAdminSubstitutionReason
                  (example to http://terminology.hl7.org/ValueSet/v3-SubstanceAdminSubstitutionReason)

                  A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

                  TypCodeableConcept
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  222. MedicationRequest.priorPrescription
                  Definition

                  A link to a resource representing an earlier order related order or prescription.

                  KortAn order/prescription that is being replaced
                  Kontroll0..1
                  TypReference(MedicationRequest)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  224. MedicationRequest.detectedIssue
                  Definition

                  Indicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. Drug-drug interaction, duplicate therapy, dosage alert etc.

                  KortClinical Issue with action
                  Kommentarer

                  This element can include a detected issue that has been identified either by a decision support system or by a clinician and may include information on the steps that were taken to address the issue.

                  Kontroll0..*
                  TypReference(DetectedIssue)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Alternativa namnContraindication, Drug Utilization Review (DUR), Alert
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  226. MedicationRequest.eventHistory
                  Definition

                  Links to Provenance records for past versions of this resource or fulfilling request or event resources that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the resource.

                  KortA list of events of interest in the lifecycle
                  Kommentarer

                  This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

                  Kontroll0..*
                  TypReference(Provenance)
                  Är modifierarefalse
                  Sammanfattningfalse
                  Invarianterele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))